Macros of the "No Recoil" class, that is, LUA scripts for logitech g-series mice, which support - Logitech Gaming Software and GHUB, in the game PUBG almost completely remove vertical recoil from AKM, BERYL and M416.
IF YOU HAVEN´T FOUND THE RIGHT MACRO ON SALE. THEN I CAN MAKE YOU A MACRO FOR A CERTAIN PAYMENT.
The scripts were written for a 40-round mags, for shooting from a standing position in first person for the mouse sensitivity settings in the game: for 1x - 50, for 2x...4x - 47...48, vertical sensitivity multiplier - 1.0, FOV - 103.
Attention!!! There is a possibility that for technical reasons ("Input Lag" - affecting the operation of macros), or when changing the FOV, or when modifying weapons, if the sight pulls down during shooting, then reduce the values in the mouse sensitivity settings in the game, if up, then increase.
If the mouse sensitivity settings in the game are too large for you, or too small, then you can change the dpi of your mouse, this will not affect the work of scripts.
When the script is turned on, the ScrollLock icon on the keyboard will light up; when the script is turned off, the ScrollLock icon will go out. When switching between different recoil removal modes - flashes.
Attention!!! In scripts, control of different modes of removing recoil is implemented using the joint use of keyboard and mouse buttons. For stable switching, the keyboard button must be held for 3 seconds. That is, when switching, press and hold the desired keyboard button in the pressed state, then click the desired mouse button and after 3 seconds release the keyboard button.
Turn off the script - left shift + 6th mouse button. Logitech G Pro X Superlight mice have a separate script folder. In them, turn off the script: left shift + right mouse button.
M416 - 5th mouse button.
M416 with a compensator, or with a vertical foregrip - left shift + 5th mouse button.
M416 with compensator and vertical foregrip - left ctrl + 5th mouse button.
AKM - 4th mouse button.
AKM with compensator - left shift + 4th mouse button.
BERIL - 3rd mouse button.
BERIL with a compensator, or with a vertical foregrip - left shift + 3rd mouse button.
BERIL with a compensator and a vertical foregrip - left ctrl + 3rd mouse button.
Attention!!! If you have "change DPI" on the 6th mouse button, then you need to reassign the 6th button to G-shift in the program settings for logitech, then move the slider and G-shift will turn on, assign "change DPI" to the 4th button "and return the slider to its original position and close the mouse settings. If you need to change the DPI, then press and hold down the 6th mouse button and click the 4th mouse button.
For comfortable use of scripts, you need a keyboard with buttons: NumLock and CapsLock.
There are also separate recoil removal modes for different scopes. Control is carried out using a combination of buttons: left alt + 6th mouse button. Logitech G Pro X Superlight mice have a separate script folder. They are controlled by a combination of right shift + right mouse button buttons.
1x (front sight, collimator, holographic sight) - this mode of recoil removal by default is turned on after the script starts (NumLock and CapsLock are off).
2x - the recoil removal mode for this scope is activated after the first press of "left alt + 6th mouse button" (NumLock on the keyboard will light up).
3x - the second press will turn on the recoil removal mode for this scope (CapsLock will light up, NumLock will go out).
4x - after the third press (NumLock and CapsLock - both icons are lit).
The fourth click will return to the 1x sight and so on in a circle.
"v3.1.92 (v3.3.92)" - after enabling the script, removing recoil for scopes 1x...4x by pressing the left mouse button. When the right mouse button is pressed - fixed recoil removal mode for 1x scope (mouse sensitivity settings in the game, for shooting from a third person - 47). That is, for example, you have turned on the recoil removal mode for the 4x sight, then for shooting from the third person you will have the recoil removal mode for the 1x scope.
"v3.2.92 (v3.4.92)" - removing recoil in these scripts only when the right mouse button and left button are pressed. If you do not press the right button, the left button will work as usual.
"v3.1.92 and v3.2.92" - these are versions of scripts for Windows 10 version 1909 and below.
"v3.3.92 and v3.4.92" - these versions of scripts for Windows 10 version 2004 and higher, use in the event that v3.1.92 and v3.2.92 do not work.
Attention!!! If you have a wireless mouse, or a monitor that is not 60Hz, or you have Windows 10 version 2004 and higher, then write to me and I will send you scripts for the test.
After payment you will receive a link to download the archive with macros. If you accidentally closed the page with this link, you can return it by clicking on the link in the letter that came to your e-mail after payment. You can also go to your personal account at oplata.info and your purchase will be displayed there.
Problems that happen with Logitech and how to solve them!!!
If you have a G304, G305, G602, G603, G604 or similar mouse that cannot be connected to a wire. And if your scripts do not work stably on it. Then you better sell such a mouse and buy yourself another, any wired Logitech, in order to use scripts normally.
If you have a G600 mouse, then you should use only the GHUB program.
If your scripts do not work stably on a wireless mouse, then you need to connect the wire and run GHUB or Logitech Gaming Software with administrator rights.
Before installing the GHUB, you must have Logitech Gaming Software installed.
The Logitech Gaming Software, or GHUB program is best run with administrator privileges.
Third-party programs that can use side mouse buttons, for example Diskord, can cause problems with running scripts, keep this in mind.
Profiles for games in GHUB and Logitech Gaming Software, it is better not to use because of possible problems with anti-cheat. It is better to use a desktop profile with the "persistent" attribute.
There is also a theory that a wi-fi router can interfere with the operation of a wireless mouse.
In new versions of GHUB there are problems with importing scripts, with their preservation and launch. The problem is resolved if you select English in GHUB.
If you cannot solve the problems in the new version of GHUB, then you need to download the old version of GHUB: https://drive.google.com/file/d/1ffXNTp5iQZ8woltyIj7CKkeY6Oz6ux3x/view
After installing the old version of GHUB, you immediately need to clear the check mark in - Enable automatic update.